Moon Sand

Hardwood Haven

How to sand and finish your floor

Guide

Steps

aec 1.) Security.

aec 2.) Determine if you have hardwood floors.

aec 3.) Remove all the layers of carpet or basement.

aec 4.) Rental equipment.

aec 5.) Sanding the floor sander.

aec 6.) Sanding sander grinder.

aec 7.) Scratch.

aec 8.) Prerequisite.

aec 9.) Vacuum.

aec 10.) Picking the right finish.

aec 11.) Application of the finish.

aec 12.) Prerequisite between layers.

aec 13.) Floor Care.

  

1.) Security

The first and most important is safety. When you do one of the following steps, I strongly recommend the importance of safety and / or prevention gear such as goggles, ear plugs, masks, work gloves, back braces and knee pads . You only have one body so please take care of it!

2.) Determine if you have hardwood.

      Have you not even hardwood that is likely to be rehabilitated? There are two ways to find out. If you just pull the carpet a couple of corners in an inconspicuous place like a closet and can be seen below.

If you have not finished basement ceiling, you can sometimes see the ground from there. Sometimes you can even see the kind and quality of wood from below. It gets complicated from there, if your soil is covered with tile, linoleum or another sub-floor. If you can not see anything in the basement, then you have to pull a small portion of the sub-floor to reach the wood.

3.) Remove all the layers of carpet or basement.

Take a razor knife and cut the carpet in t.